 |
 |
|
Material: Titanium
Recommended Torque: 20 in. lbs
1Intermediate exposure sizes are available in .005" increments as well as extended hub design for blades thicker than .030".
Chart below indicates maximum exposure for each flange series:
Flange
Part Number
Prefix |
Maximum
Blade
Exposure |
| 2.050DTBA |
110 |
| 2.187DTBA |
180 |
| 2.25DTBA |
250 |
| 2.25MDTBA |
200 |
| 3MDTBA |
550 |
2A puller, part # DAFP-2LHT (Left Hand Thread), is recommended for ease of removing the DTBAXXXXX12MM tapered blade adapter from the dicing saw spindle arbor.
3A puller, part # DAFP-2LHT (Left Hand Thread) or # DAFP-3RHT (Right Hand Thread), is recommended for ease of removing the DTBAXXXXX18MM spindle adapter from the dicing saw spindle arbor. | |
| Diamond Blade Size |
Flange
Part Number
Prefix |
| 2.050" O.D. x 1.575" I.D. |
2.050DTBA/1225LH |
| 2.187" O.D. x 1.575" I.D. |
2.187DTBA/1225LH |
| 2.250" O.D. x 1.500" I.D. |
2.25DTBA/1225LH |
| 2.250" O.D. x 1.575" I.D. |
2.25MDTBA/1225LH |
| 3.000" O.D. x 1.575" I.D. |
3MDTBA/1225LH | |
 |
 |
| Thread |
Flange
Part Number
Prefix |
|
Left
Hand |
LH |
|
Right Hand |
RH | |
 | |
|
 |
1Blade Exposure
(inches) (mils) |
| .010 |
10 |
| .015 |
15 |
| .020 |
20 |
| .025 |
25 |
| .030 |
30 |
| .040 |
40 |
| .050 |
50 |
| .060 |
60 |
| .070 |
70 |
| .080 |
80 |
| .090 |
90 |
| .100 |
100 |
| .125 |
125 |
| .150 |
150 |
| .175 |
175 |
| .200 |
200 |
| .250 |
250 |
| .300 |
300 |
| .350 |
350 |
| .400 |
400 |
| .450 |
450 |
| .500 |
500 |
| .550 |
550 | | |
 |
| Diamond Blade Size |
Flange
Part Number
Prefix |
| 2.050" O.D. x 1.575" I.D. |
2.050DTBA/1825 |
| 2.187" O.D. x 1.575" I.D. |
2.187DTBA/1825 |
| 2.250" O.D. x 1.500" I.D. |
2.25DTBA/1825 |
| 2.250" O.D. x 1.575" I.D. |
2.25MDTBA/1825 |
| 3.000" O.D. x 1.575" I.D. |
3MDTBA/1825 |
| |
