Thermocarbon-Manufactured High Quality Dicing Blade Flanges

Now Viewing Flange Type:
2" to 3" Series "Tcar" Type Flanges
For mounting 2" O.D. to 3" O.D. Series Dicing Blades
Thermocarbon-manufactured high-quality dicing blade adapters & flanges for use on Thermocarbons high-precsion dicing saw model Tcar 864-1 designed to ensure micron precision dicing of microelectric substrates ands optics.

back to all flanges

Technical Specifications:

¹Blade Exposure (inches) (mils)
.010	10
.015	15
.020	20
.025	25
.030	30
.040	40
.050	50
.060	60
.070	70
.080	80
.090	90
.100	100
.125	125
.150	150
.175	175
.200	200
.250	250
.300	300
.350	350
.400	400
.450	450
.500	500
.550	550

Material: Titanium
Recommended Torque: 10 in. lbs

¹ Intermediate exposure sizes are available in .005" increments as well as extended hub design for blades thicker than .125".

Diamond Blade Size	Flange Part Number Prefix
2.000" O.D. x 1.000" I.D.	2TCAR
2.050" O.D. x 1.575" I.D.	2.050TCAR
2.187" O.D. x 1.575" I.D.	2.187TCAR
2.250" O.D. x 1.500" I.D.	2.25TCAR
2.250" O.D. x 1.575" I.D.	2.25MTCAR
3.000" O.D. x 1.575" I.D.	3MTCAR
3.000" O.D. x 2.000" I.D.	3TCAR

Chart below indicates maximum exposure for each flange series:

Flange Part Number Prefix	Maximum Blade Exposure
2TCAR	110
2.050TCAR	110
2.187TCAR	180
2.25TCAR	250
2.25MTCAR	200
3MTCAR	550
3TCAR	375

²A blade dismounting tool is required to separate the male and female halves of the flanges. The tool is comprised of the Tcar-DT and Tcar-Plunger which is supplied with each flange ordered. The Tcar-PULLER is supplied with the Tcar 864-1 Dicing Saw to facilitate flange removal from the spindle arbor.

An adapter is available for alternating between the resin and metal-bonded hubbed blades to eliminate the need to readjust coolant nozzles and scope positions.